Tokisaki Galaxy
C++ | Linux | Games | 网络
117 字
1 分钟
Flashing OpenWrt on a Raspberry Pi 3B as a Side Router
References
Firmware Download
Flashing
Using etcher is enough. Then go into Linux and use GPart to expand the partition; otherwise, the SD card space can’t be fully utilized.
Configuration
emmm, in the end I didn’t achieve the bypass gateway described in the sspai article, only a single-arm router. I’ll come back when I manage to set up a bypass gateway. A bypass gateway only affects upstream data, while a single-arm router affects both upstream and downstream. On the Raspberry Pi 3B, the network card has a hard upper limit of 100M, so it can’t be maxed out and will affect network speed…
Flashing OpenWrt on a Raspberry Pi 3B as a Side Router
https://tski.uk/blog/en/rpi-openwrt-sideroute/